Hello, I have the Watermate pro system. The control panel all working well but the pump will not draw any water. I’ve cleaned all the pipes and filters and it still makes a noise but has no suction to it at all. Any tips?
Hi SeaniB,
I would disconnect the outlet from the pump or at the valves and aim into bucket when diagnosing / testing, it might prime easier, and if it works you will also be able to check the flow better.
There are a few videos on YouTube of similar pumps being dismantled/serviced.
Regards Paul
Register for a free account and join the Harvst community.
Found some troubleshooting information in the FL Series pump manual that might help.
Regards Paul
I would disconnect the outlet from the pump or at the valves and aim into bucket when diagnosing / testing, it might prime easier, and if it works you will also be able to check the flow better.
There are a few videos on YouTube of similar pumps being dismantled/serviced.
Regards Paul