I’ve just got our system up and running - at least 1 zone. Zone 2 I need to get some more pipe clips, so it will be a job for next week..
It’s a mains system with water coming from a water butt.
I get an alarm ( email and audible ), to say that the pump is pumping air or using less pressure than normal.
Water js being pumped ok, so I’m not sure what the problem is. Interestingly if I run zone 2 and let the water just run out of the valve into the ground, I still get the alarm, so it’s nothing to do with the pipe work after the valve…. And the water flow is fast, so I assume enough water is passing through.
It’s a mains system with water coming from a water butt.
I get an alarm ( email and audible ), to say that the pump is pumping air or using less pressure than normal.
Water js being pumped ok, so I’m not sure what the problem is. Interestingly if I run zone 2 and let the water just run out of the valve into the ground, I still get the alarm, so it’s nothing to do with the pipe work after the valve…. And the water flow is fast, so I assume enough water is passing through.
Any ideas?
Dave
link