A few minor updates in this release, mainly to help our development team monitor data coming from control units better. Sometimes a soil sensor stops sending data, and we are trying to ascertain exactly why they are not responding.

Other recent updates before we started posting release notes in this forum:

- You now have the ability to turn your heaters on and off using the air temperature sensor
- Additional temperature sensors ( link ) can be plugged in to the 3-pin temp sensor port ( up to 3 ) if you want to monitor other temperatures, perhaps outside air temp and inside air temp.

We are continuing to investigate why some setups report low water when there is still water in the tank. It may be related to a small number of drippers / emitters on the line; if the pump isn't moving much water it appears ( to the control box ) as though it's pumping air. Watch this space.

Hello! Am I right in thinking that Watering and Heating isn’t shown on the graph? Currently just Temp and Lights.

Hi Ben - watering is shown as blue bars/spikes ... but you'll need to zoom in to see them ( drag over a date range ). It's much easier to use the graph on a larger screen, a laptop is ideal. As for heating and lighting, that is also shown on the graph. Looking at your control unit settings however, your top heater port is off and the lower is set to turn on only when air temp falls below 7 degrees, which it hasn't done for a while. Set your temperature level to 15 to see how it goes.