We have rolled out some handy updates to the control unit firmware, which will automatically be on your control box if it's in online mode. If your control box is in OFFLINE mode, you'll need to bring it indoors, or close to your WiFi network, for a manual update. Here's how: link
In this release:
- You can now turn off the "low water" siren via the web app as well as on the device
- You can manage the "don't water below X temperature" on the web app as well as on the device
- The system no longer halves the pumping time when the battery is starting to run down; we found that this was a little over-agressive in reducing watering time.
- Further optimisations to improve battery life for wireless sensors which are paired with the control unit
Along with the firmware update, we've also rolled out some changes to the web app, including a new chart engine, which makes it easier to highlight a particular sensor data within multiple lines, and better zoom in/out.
Hi Michael - the chart X-axis now adapts better to the zoom level. When you are looking at multiple days it's no longer crowded with times. If you hover over a point it will give you the time for that point.
Register for a free account and join the Harvst community.
In this release:
- You can now turn off the "low water" siren via the web app as well as on the device
- You can manage the "don't water below X temperature" on the web app as well as on the device
- The system no longer halves the pumping time when the battery is starting to run down; we found that this was a little over-agressive in reducing watering time.
- Further optimisations to improve battery life for wireless sensors which are paired with the control unit
Along with the firmware update, we've also rolled out some changes to the web app, including a new chart engine, which makes it easier to highlight a particular sensor data within multiple lines, and better zoom in/out.