Set up with WiFi manager

Your control unit has older firmware (which will update when the box connects later), so follow these different steps.

Make sure you have access to your home WiFi network name and password.

1. Turn on your Harvst control unit. It will beep fast while hunting for a known WiFi network.
2. When one is not found, the beeps will slow down. You now have 1 minute to complete the setup process.
3. In your phone WiFi settings, connect to the network harvst-wifi which is being broadcast by your device.
4. Note that this network will not have internet access. That's OK. Allow your phone to connect.
5. Once connected to the device network, some phones will automatically redirect you to the device dashboard. If not, come back to this screen and click the button below
   Connect to WiFi manager
6. Follow the steps on WiFi manager (there will be blue buttons).

What next?

The box will reboot, and stop transmitting the harvst-wifi network. Your phone may reconnect to your home WiFi.

The control box will beep while it's hunting for a WiFi connection.

If you hear a quick double beep, the box has connected to your WiFi OK.

Connect your phone to your home WiFi (or 3G/4G), open your web browser, come back to this page and click the button below.

Connected OK. Next »

If the fast beeping continues without the double beep, it's having trouble connecting. When the beeps slow down, connect to the box WiFi network (harvst-wifi) and try again.

« Start again